24/7 Plumber

Call  1300 931 384

Leaking Tap Melbourne – Causes and Fixes

Leaking tap Melbourne

If you have experienced a leaking tap in the past, you need not be told how stressful it can be. The constant dripping from the taps will cause you sleepless nights. This is in addition to escalated water and energy bills. If you have never experienced this, then its best that you avoid it at all costs. There are a few tips on how you could repair a leaking tap Melbourne. However, in order for you to do so efficiently, you need to first learn about some of the causes of a leaking tap Melbourne.

Causes of a Leaking Tap Melbourne

There are three major cause of a leaking tap, that is, the jumper valve, o-rig and the washer. In case of a leaking tap Melbourne, these are the three places to check. These are the major tap parts that you have to deal with in case of a leak.

DIY to Leaking Tap Melbourne Repair

Disassemble the Tap

The first step to repairing a leaking tap Melbourne is dismantling the tap. Here you start by turning off water from the main source. Then you can begin with isolating the jumper valves. After the jumper valves have been isolated, it is now time to get the tap head off. Different taps come with different designs. Hence, removing the head of one tap may differ from another. It is important that all parts disassembled in this part be laid in order of their isolation. This is to aid in easy assembly.

Replacing the Washer

The replacement process is dependent on whether the washer is made of ceramic or rubber material. For the ceramic washer, you will need to replace it in full. However, for the rubber washer, only the small washer will need to be replaced.

Replacing the O-rig

The o-rig is found at the base of a tap spout. Therefore, in order to replace it, you need to first release and lift the spout in order to access the o-rig. You can then cut out the o-rig and replace it by rolling on a new o-rig. Then re position the spout and tighten the grub screw holding it.

Leaking Tap Melbourne Professional Services

Sometimes, trying to repair a leaking tap by yourself may only lead to further problems. This is especially if you are not careful with the delicate tap parts. Therefore, it is important to hire the services of a professional leaking tap Melbourne plumber. The leaking tap Melbourne professional service follows the following process;

Inspection

The leaking tap Melbourne plumbers will first assess the root cause of the leak. Proper diagnosis enables leaking tap Melbourne plumbers to achieve excellent results.

Repairs

After the leaking tap Melbourne plumbers have identified the problem, the repairs now begin. This is with the aim of stopping the leakage immediately

Control

Leaking tap Melbourne professionals will ensure that they take control measure to ensure that their repair efforts last a long time without you having to deal with a leaking tap Melbourne in the near future.

Drying

Thorough drying of the premises is conducted. This prevents growth of mould and the infestation of your premises by disease-causing insects.

 

Spread the love
  •   
  •   
  •   

Posted in: Blog

Leave a Comment (0) ↓
man small