Burst Pipe Melbourne can be extremely difficult to find. It is recommended that a Plumber Melbourne who has experience in this type of work be contacted if you have water leaking from an unknown source.
Burst Pipe Melbourne – Pipes that are run in concrete can split
When copper pipes are run in concrete without lagging or covering over them properly, the pipes can sometimes split. Copper is a material that expands and contracts when heated. Pipes that are run in concrete can split, as the pipe cannot move when the copper naturally tries to expand.
Burst Pipe Melbourne – Some companies specialize in locating the pipe work and leaks
There are companies that specialize in locating the pipe work and leaks, but they should be used in conjunction with a Plumber Melbourne who is experienced in Burst Pipe Melbourne. The pipe locators are not always licensed plumbers and will not repair any leaks. It is important that the Plumber Melbourne who is going to repair the leak is present when the pipe locating company is performing their work. Finding the leak is the first part of the job and repairing or re-running the pipe is the second part. If a thorough tracing of the pipes is not completed and a re-run is required, this could result in water being shut off to parts of the house or building for a longer period than is required.
Only use a Plumber Melbourne who has experience in locating a Burst Pipe Melbourne
Some Plumbers Melbourne may have the equipment to trace copper pipes but unless they are using the equipment on a regular basis, it is better to use a company that specializes in this type of work as they can solve the issues much faster and will save you money in the process.
If you have a leaking pipe, ask these questions when calling a Plumber Melbourne:
1. Have you had any experience in tracing leaks?
2. Do you have the correct pressure testing equipment?
3. Do you have the required pipe-locating equipment or use a specialized leak detection company?
Burst Pipe Melbourne – Some new homes do not have copper pipes
Many homes and units that have been built in the last 15 years do not have copper pipes for hot and cold-water supply. This makes the Burst Pipe Melbourne locating process much more difficult. These pipes are a plastic poly butylene and cannot be traced as easily as copper pipes. The plastic hot pipe can be traced using an infrared tool. When the pipe becomes hot by running hot water through it the infrared will show up on the pipe monitor. To find a leak in plastic cold water pipes, you need to connect it to the hot water system. Once hot water is running through the pipe, the leak will show up on the infrared monitor.