Hot water is a requirement in every Australian home, which makes a hot water system a necessity in every household. There is a variety of hot water systems that are available for purchase in Australia. Read this article to get a better idea of the right hot water system Melbourne to purchase for your family. 

Hot Water System Melbourne – Fuels and Power sources

• Natural gas– can be used in both storage hot water systems and continuous flow hot water system Melbourne. Natural gas systems are rated according to their energy efficiency and come in both internal and external models.  Gas storage heaters have a smaller capacity than off-peak electric ones as they can heat the water up at any time of the day or night as opposed to within a certain time only.
• Off peak electricity– has similar running costs to a natural gas system but is only available where the hot water system Melbourne has a storage capacity of 160 liters or more.  The hot water is generally heated overnight for use throughout the day.  It cannot be used by continuous flow systems and is available for both internal and external use.
• Solar energy– can provide up to eighty percent of your hot water free of charge, making it a very environmentally friendly option.  They are the cheapest hot water system Melbourne to operate but do have a high initial purchase price.  All solar hot water system Melbourne come with a “booster” source of power (such as gas or electricity) to provide hot water during times when there is little sun.  Mains pressure and constant pressure is available.
• Peak electricity– is used for electric continuous flow units and storage water heater Melbourne that are smaller than 160 liters in capacity.  They can be expensive to run but are very popular in areas where space is limited such as in units and apartments.
• LPG– is used in areas where natural gas is not available.  It is suitable for both continuous flow and storage hot water system Melbourne.
• Solid fuels– this includes wood, coal, briquettes and so forth, so the cost of the fuels can vary widely.  Solid fuels can be used on their own or in conjunction with off peak electricity or solar in constant pressure systems.  They cannot be used with mains pressure systems unless a heat exchanger is used and cannot be used in continuous flow systems.
• Heat pumps– is high efficiency and uses around seventy percent less electricity than other electric hot water systems Melbourne. They work by extracting heat from the atmosphere using a refrigerant gas and a compressor and using that heat to heat water stored in a tank at ground level.

Servicing and Hiring a Hot Water System Melbourne Specialist

 Hot water system Melbourne suppliers can assist with:

• Advising on a suitable hot water system Melbourne
• Installation of your hot water system Melbourne
• Service and repairs for your hot water system Melbourne
• Supply of the various types of hot water system Melbourne
• Plumbing of the water and gas pipes to your new hot water system  Melbourne

Ensure that the hot water system Melbourne supplier can help you to choose the correct system for the number of people in your household.  They should also allow for possible changes in the use of the hot water system Melbourne in the future brought about by such things as an expanding family, the introduction of new appliances such as dishwashers and so forth. A reputable plumber can install or replace al types of hot water systems Melbourne, including electric, gas and solar.

Ensure that the system comes with a warranty, and that the supplier is willing to provide installation in a reasonable time-frame.  It is also useful if your supplier can provide emergency repairs or can direct you to someone that does.

The best method to find out about a hot water system is to get in touch with a professional plumbing business such as Melbourne 24 Hour Plumbing